Home / Rotary Equipment

Rotary Equipment

Rotary

Falat Ghareh DI are able to supply a wide range of rotary equipments, including:

rotary1

 

Axially Split Casing Pumps

 

An axial split case pump is a pump whose casing is split axially, or whose principal joint is parallel to the shaft centerline. The casing is split into an upper half and a lower half. An axially split case pumps is always a horizontal pump.

rotary2

 

Centrifugal Pumps

 

Centrifugal pumps are used to transport liquids/fluids by the conversion of the rotational kinetic energy to the hydro dynamics energy of the liquid flow.

rotary3

 

End Suction Pumps

 

We offer two distinct end suction pump designs, Both designs are suitable for horizontal or vertical mounting. Direct coupled end suction pumps and the long coupled end suction pumps.

rotary4

 

 

In-Line Pumps

In-line design allows for straight pipe work which can reduce installation costs. Pumps can be supplied with ATEX certification if required and have a top pull out design for easy dismantling in case of service.

rotary5

 

 

Multistage Screw Pumps

Screw Pumps can be supplied offering as single screw pumps (Eccentric Screw), double screw pumps and three screw pumps. Each offering differing performance for pressure and viscosity requirements.

rotary6

 

 

ertically Suspended Pumps

 

Vertically suspended cantilever sump pumps, wet pit vertically suspended single-casing axial-flow pumps, double-casing diffuser vertically suspended pumps, for the petroleum and gas industrial services sector.

rotary7

 

 

Gas Turbines

A gas turbine is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber.
The high velocity and volume of the gas flow is directed through a nozzle over the turbine’s blades, spinning the turbine which then powers the compressor and, for some turbines, drives their mechanical output. The energy supplied to the turbine comes from the reduction in the temperature and pressure of the exhaust gas. Gas turbines are widely used in our specialist markets and as such we have in-depth experience in supporting such units.

rotary8

 

 

Steam Turbines

A steam turbine is a device that extracts thermal energy from pressurized steam and uses it to carry out mechanical work on a rotating output shaft.
Because the turbine generates rotary motion, it is particularly suited to be used to drive an electrical generator – a unit widely used in oil and gas facilities around the globe.

rotary9

 

 

Compressors

Compressors are similar to pumps, both increase the pressure on a fluid and both can transport the fluid through a pipe. As gases are compressible, the compressor also reduces the volume of a gas. Liquids are relatively incompressible; while some can be compressed, the main action of a pump is to pressurize and transport liquids.

rotary10

 

 

Reciprocating Engines

A reciprocating engine, also often known as a piston engine, is a heat engine that uses one or more reciprocating pistons to convert pressure into a rotating motion. The main types are: the internal combustion engine, used extensively in motor vehicles; the steam engine, the mainstay of many industrial applications and the niche application Stirling engine.

Home  |  Piping  |  Mechanical  |  Civil & Structural  |  Electrical  |  Instrumentation  |  Valves  |  Rotary  |  Instrument  |  Contact